Mikroe Hexiwear Workstation

  • Product ID: 7509
  • MPN: MIKROE-3017
M.R.P: ₹13,375.70
₹10,289.00 Backordered
₹12,141.02 (Incl. GST)
You Save: ₹3,086.70 (23%)
Estimated delivery between Jul 15 - Jul 21
Free Shipping

Quality
First

Awesome
Support

Secure
Checkout

EMI
Available
Bulk Discounts
Qty Price
1-5 ₹10,289.00
6-9 ₹9,980.33
10-49 ₹9,774.55
50+ ₹9,260.10
Qty

Description

What’s on Board

hexi-workstation-whats-on-board-image.jp
pins.png
pins.png
pins.png
pins.png
pins.png
pins.png
pins.png
pins.png
pins.png
pins.png
pins.png
pins.png
pins.png
pins.png
pins.png
hexi-ws-dual-power-supply.jpg

Power supply

Via DC connector or screw terminals (7V to 23V AC or 9V to 32V DC), or via USB cable (5V DC).

hexi-ws-mikroprog.jpg

MikroProg

Powerful onboard OpenSDA compatible mikroProg programmer and In-Circuit Debuger (ICD) can program and debug a docked Hexiwear.

hexi-sw-mezzanine-connector.jpg

Hexiwear docking connector

Hexiwear Workstation board is equipped with a small male mezzanine connector, which is used to interface the Hexiwear platform with the board.

hexi-sw-usb-uart.jpg

USB connector

USB connector allows connection with the integrated Open-SDA compatible programmer.

hexi-ws-analog-input.jpg

Analog input

The Hexiwear Workstation board provides an analog interface in the form of one potentiometer, which acts as a voltage divider.

hexi-ws-analog-input.jpg

Input/Output Group

These groups contain buttons, LEDs and headers, routed to the pins of the docking connector. They allow interaction with the docked Hexiwear, either by pressing buttons, displaying states of its pins on the LEDs, or using headers to interface it to an external device.

hexi-ws-aydio.jpg

Audio module

The board comes with two audio amplifiers, capable of delivering up to 675mW of continuous RMS power into two built-in 8-ohm speakers.

hexi-ws-breadboard.jpg

Breadboard

The board also contains a breadboard area as well as additional 1x52 female header, side by side.

hexi-ws-button-press-level.jpg

Button Press Level

The tri-state DIP switch, labeled as “BUTTON PRESS LEVEL” (SW7), is available for selecting which logic state will be applied to the corresponding group pins, when the button is pressed. Each of the SW7 DIP switches controls the behavior of the entire group to which it is assigned (G0 to G4)

hexi-ws-microsd-slot.jpg

microSD card slot

Hexiwear Workstation comes equipped with a MicroSD card reader so that you can store all your data

hexi-ws-mikrobus-slots.jpg

mikroBUS™ sockets

With four mikroBUS™ sockets you can add dozens of new functionality to your board with minimum hardware adjustments

hexi-ws-piezo-buzzer.jpg

Piezo buzzer

Hexiwear Workstation comes with a piezo buzzer which can be connected to G2.5 or G4.0 pins.

hexi-ws-reset-buttons.jpg

Reset buttons

Two reset buttons can be used to manually reset the respective MCUs of the docked Hexiwear - both the main MCU (K64F) and the multimode radio SoC (K40Z)

hexi-ws-sw2-switch.jpg

DIP Switches

The extensive routing capabilities of Hexiwear Workstation board allow flexible selection of peripheral modules. Every module can be routed to the appropriate Hexiwear pins, allowing a wide range of different projects to be developed on the same Hexiwear Workstation board, saving a lot of development time.

hexi-ws-temp-sensor.jpg

Temperature sensor

DS1820 is a digital temperature sensor that uses 1-wire® interface for its operation. It is capable of measuring temperatures within the range of -55 to 128°C.

What is HEXIWEAR Workstation

While Hexiwear combines style and usability found in high-end consumer devices, with the functionality of sophisticated engineering development platforms, the Hexiwear Workstation offers you the choice of expandability. Equipped with 4 mikroBUS™ sockets, an onboard programmer and debugger, a microSD card slot, digital temperature sensor, buttons, LEDs and more. Start your IoT adventure today.

easypic_v7_main.jpg

Modules

USB connector

Ethernet ICD

USB connector allows connection with the integrated OpenSDA compatible programmer.

microSD card slot

UART RS-232

Hexiwear Workstation comes equipped with a MicroSD card reader so that you can store all your data

Analog input

GLCD/LCD

The Hexiwear Workstation board provides an analog interface in the form of one potentiometer, which acts as a voltage divider.

Audio module

GLCD/LCD

The board comes with two audio amplifiers, capable of delivering up to 675mW of continuous RMS power into two built-in 8-ohm speakers.

Port Headers

port headers

The connectivity arsenal you need - two male IDC10 headers and a row of 10 PCB pads.

Temperature sensor

GND

DS1820 is a digital temperature sensor that uses 1-wire® interface for its operation. It is capable of measuring temperatures within the range of -55 to 128°C.

mikroProg

port headers

Powerful onboard OpenSDA compatible mikroProg programmer and In-Circuit Debuger (ICD) can program and debug docked Hexiwear.

Reset buttons

port headers

Two reset buttons can be used to manually reset the respective MCUs of the docked Hexiwear - both the main MCU (K64F) and the multimode radio SoC (K40Z)

Breadboard

GND

The board also contains a breadboard area with the additional 1x52 female header, which can be used for a custom circuit development

Piezo buzzer

GND

Hexiwear Workstation comes with a piezo buzzer which can be connected to G2.5 or G4.0 pins and used as the sound signalization or notification in your applications

Hexiwear docking connector

Ethernet ICD

Hexiwear Workstation board is equipped with a small male mezzanine connector, which is used to interface the Hexiwear platform with the board.

Input/Output Group

UART RS-232

These groups contain buttons, LEDs and headers, routed to the pins of the docking connector. They allow interaction with the docked Hexiwear, either by pressing buttons, displaying states of its pins on the LEDs, or using headers to interface it to an external device.

mikroBUS™ sockets

15_mikrobus_easypic-v7.jpg

With four mikroBUS™ sockets you can add dozens of new functionalities to your board with minimum hardware adjustments. Collection of mikroBUS™ compatible is growing rapidly, and we have designed them with great care, saving you a precious development time. Just plug your board in, and you are good to go.

What’s in the Package

HEXIWEAR Workstation is packed in the protective box along with the relevant documentation. This box is very resistant to all kinds of damages and shocks. The package contains:


box

Damage resistant protective box

board

HEXIWEAR workstation board in antistatic bag

usb

USB cable

documentation

User Manual and Board Schematic

Note: Hexiwear is not included in the package.