Adafruit Trinket 5V - Mini Microcontroller
- Product ID: 110
- MPN: ADA1501
Are you looking for a microcontroller for your project and just need a few IO pins? Adafruit's Trinket Mini Microcontroller is the board for you. This tiny little board runs powerful ATTiny85 micro controller and has 8K of flash and 5 IO Pins. Just connect it to a computer via USB and use it as a mini Arduino board. Perfect for when you don't want to give up your expensive dev-board and you aren't willing to take apart the project you worked so hard to design. It's Adafruit's lowest-cost arduino-IDE programmable board!
The Adafruit Trinket comes in 2 variations, 5V and 3V logic. Both work the same, but have different operating logic voltages. Use this 5V Trinket for sensors and components that can use or require 5V logic. The 5V version can run at 8 MHz or at 16MHz by setting the software-set clock frequency.
Use 3V Trinket to interface with sensors and devices that need 3V logic, or when you want to power it off of a LiPo battery. The 3V version should only run at 8 MHz.
Even though you can program Trinket using the Arduino IDE, it's not a fully 100% Arduino-compatible. There are some things you trade off for such a small and low cost microcontroller!
- Trinket does not have a Serial port connection for debugging so the serial port monitor will not be able to send/receive data.
- Some computers' USB v3 ports don't recognize the Trinket's bootloader. Simply use a USB v2 port or a USB hub in between.
|Operating Voltage||5V DC|
|Input Voltage (Limits)||5 to 16V DC|
|Digital I/O Pins||4 (of which 2 provide PWM output)|
|Analog Input Pins||1|
|Flash Memory||8 KB (2.75 KB used by boot loader)|
|USB||Mini USB for power or USB uploading|
|Clock Speed||8 MHz (internal oscillator) can be increased to 16 MHz in software|
|Power Supply||USB or external output (battery or power supply) - automatic switching|
|Dimensions||31 x 15.5 x 5 mm|